perhonor Irrigation Fittings for 1/2" Tubing 6 Tees 6 Couplings 3 Elbows 6 Tubing End Caps for Compatible Drip and Rain Bird or Plant Watering System- 21 Piece Set for Drip Irrigation Systems
Huge Savings Item! Save 19% on the perhonor Irrigation Fittings for 1/2'' Tubing 6 Tees 6 Couplings 3 Elbows 6 Tubing End Caps for Compatible Drip and Rain Bird or Plant Watering System- 21 Piece Set for Drip Irrigation Systems by perhonor at The Net Stores Network. Hurry! Limited time offer. Offer valid only while supplies last. The PE pipe fittings with three-layer inverted hooks and the joint of 1.5-inch-long is stable and watertight, and will not fall off (please connect
The PE pipe fittings with three-layer inverted hooks and the joint of 1.5-inch-long is stable and watertight, and will not fall off (please connect the pipe to the bottom to prevent it from falling off for excessive water pressure).
Tees are used for dividing one water flow into two water flows: when the pipe is needed to be shunted, cut up the pipe and connect them with PE Tees to provide a joint for connecting with PE pipe.
It is stable and reliable, watertight and easy to install.
Couplings is used for connecting the water pipe that is not long enough, or connect the water pipes when the hole drilled on the pipe is incorrect.
End Cap Plugs is used for water plugging at the end of PE pipe， it is used for folding of PE pipe and other tubes, which is equivalent to the end cap.
The joint with three-layer barbed hooks can hook up the pipe firmly.
If you wish to soften the tubing before installing the fitting, let the tubing rest in the hot sun or briefly apply a heat gun or blow dryer to the tubing end before inserting the fitting
If your system runs at pressures higher than 25 PSI, you may want to use ratchet clamps to secure the tube on the fitting
Features & Highlights
- 1、The drip irrigation system is manufactured with pure new engineering plastics and good anti-aging formula, so it has good anti-aging performance and durability.
- 2、The PE pipe fittings with three-layer inverted hooks and the joint of 1.5-inch-long is stable and watertight, and will not fall off (please connect the pipe to the bottom to prevent it from falling off for excessive water pressure).
- 3、Connector for use with 1/2" drip irrigation tubing，Compatible with many types of Rainbird, Orbit, Dig and Toro tubing as well as generic 1/2" blank tubing or drip lines
- 4、21 Piece set ,includes 6 tees, 6 couplings, 3 elbows and 6 Figure Eight Line End Closures，Used for half inch( 1/2" ) drip tubing from 0.560 to 0.600 Inside Diameter (ID)
- 5、High quality barbs grab tubing creating a fast, and secure leak-proof connection. Ideal for repair or to extend additional tubing in a drip system.
|Package Weight:||0.48 pounds|
|Package Size:||5.47 x 2.83 x 2.83 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by perhonor, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 24-003, ean: 0013158160694,
1/2" .620 OD Compression Tee, GreenHigh impact plastic. Color coded. UV-resistant. Secure and easy installation without glues or clamps. Operating pressure: 10 to 30 PSI. ...
mpn: 69745, ean: 0852687591445,
For dripper systems that connect to your standard garden hose faucet, this shut-off Y-valve is great. With 2 individual ports, you can run your irrigation drip system and a water hose at the same time and still be able to shut them off individually. ...
mpn: DSR, ean: 0840620100168,
The 3/4" fht x 700 compression Tee sprinkler riser to drip Conversion kit DSR model is used to convert a 1/2" sprinkler riser into a low flow drip irrigation zone. The DSR includes a 1/2" Conversion adapter, a 25 PSI preset pressure regulator, & a 70...
[High Quality] The Deyard Garden Watering System use quality drip hose made of high quality, UV resistant materials, unmatched resistance to chemicals. It can be left out year-round, buried or on the surface in any weather.. [Simple Installation] It ...
Specification: Material: Terracotta | Weight: 1.7 lb Size: 8.5" (L) X 8" (H) X 5.7" (W) | Quantity: 6 Pack TWO Steps to Use 1) Soak the Terracotta self-watering spikes in water when you use it for the first time which will prevent terracotta wateri...
mpn: Fditoy7fv45q2x, ean: 0763741595692,
Fdit is a selfless and careful home-kitchen supplies craftsman,he devotes himself to provide the top-notch home-kitchen supplies to the common folk. We take each order seriously while our customers choose our product, because it is about your conve...
mpn: 67401, ean: 0852687300467,
This Orbit barbed drip tee comes in a bag of 25 and works with all brands of 1/4-inch drip irrigation line. This barb tee has additional holding power with triple barbing. This drip tubing tee fitting is great for do-it-yourself drip system irrigatio...
By One Stop Outdoor
mpn: 4336409647, ean: 0840620110587,
Home Grow Drip Kit For indoor and outdoor growing in any medium 12-outlet drip irrigation manifold is designed to adapt to any 1/2" pipe thread riser. It may be incorporated into a new system, or used to convert an existing sprinkler riser into a 12-...
mpn: 15-012, ean: 0013158160588,
1/2" .700 OD Compression Hose End with 3/4" FHT Flush CapHigh impact plastic. Color coded. UV-resistant. Secure and easy installation without glues or clamps. Operating pressure: 10 to 30 PSI. ...
mpn: 67005, ean: 0816602021202,
This Orbit 4-port drip irrigation manifold has a flow control top so you can adjust water flow easily to meet your many watering needs. All ports have 1/4-inch barbs to allow for attachment to 1/4-inch drip line. This drip irrigation manifold�s fil...